TNC-6A Operation Microscope is widely used in Orthopedics, Hand
Surgery and Plastic Surgery for the anastomosis of capillaries and nerves.
It allows simultaneous operation of two doctors, and supports image taking and video recording when equipped with CCD camera. This an excellent medical instrument for surgery, teaching and research..
It allows simultaneous operation of two doctors, and supports image taking and video recording when equipped with CCD camera. This an excellent medical instrument for surgery, teaching and research..
Features
1. Continuous zoom optical system featuring clear image, strong stereo perception and broad field of view.
2. Surgeon and assistant can observe at the same magnification ratio.
3. Objective lenses with different focus lengths allow three different
1. Continuous zoom optical system featuring clear image, strong stereo perception and broad field of view.
2. Surgeon and assistant can observe at the same magnification ratio.
3. Objective lenses with different focus lengths allow three different
working
distances for surgeries at various depths.
4. Coaxial light source of up to 80000Lx illumination has
4. Coaxial light source of up to 80000Lx illumination has
excellent performance
for deep Operation.
Specifications
1. Binocular and same light route, magnification and field of view for two operators
2. Working distance: 200mm/250mm/300mm
3. Magnification: 5X, 25X motorized continuous zoom or manual zoom
4. Diameter of field of view 55 11mm
5. Eyepiece: 12.5X, 27.5mm Erfle wide angle eyepiece
6. Built-in micrometer: accuracy 0.1mm; length of measurement 10mm
7. Adjustment of eye distance: 5475mm
8. Visual acuity adjustment: ±6D
9. Motorized fine tuning: 40mm
10. Up-down adjusting range: 500mm
11. Maximum extending distance: 1200mm
12. Swing angle of cross arm:240º
13. Foot control X-Y plane mover: 40mm forward/back/left/right
14. Light source: 150W/15V coaxial light source
15. Power supply: 220V/50Hz or 110V/60Hz
1. Binocular and same light route, magnification and field of view for two operators
2. Working distance: 200mm/250mm/300mm
3. Magnification: 5X, 25X motorized continuous zoom or manual zoom
4. Diameter of field of view 55 11mm
5. Eyepiece: 12.5X, 27.5mm Erfle wide angle eyepiece
6. Built-in micrometer: accuracy 0.1mm; length of measurement 10mm
7. Adjustment of eye distance: 5475mm
8. Visual acuity adjustment: ±6D
9. Motorized fine tuning: 40mm
10. Up-down adjusting range: 500mm
11. Maximum extending distance: 1200mm
12. Swing angle of cross arm:240º
13. Foot control X-Y plane mover: 40mm forward/back/left/right
14. Light source: 150W/15V coaxial light source
15. Power supply: 220V/50Hz or 110V/60Hz
Options
CCD Camera
Connector for images taking and video recording
Monocular teaching scope
CCD Camera
Connector for images taking and video recording
Monocular teaching scope
.jpg)
Post a Comment